Brymar Satellite
[ home ]  [ back ]  [ shop ]  [ info ]  [ search ]  [ view cart ]  [ checkout ]  [ e-mail ] 
view cart
checkout
search
info
e-mail



SuperJack DG-320 DiSEcQ Motormount SuperJack DG-320 DiSEcQ Motormount


DiSEcQ 1.2 & 1.3 motormount for use with dishes up to 1.0metre. Adjustable East West mechanical limits. Goto X function. Manual move buttons and LEDs for status check to aid setup. Metal main gear, Anti backlash system. Highly Recommended.

 currency



price only:  £54.95


DiSEcQ 1.2 Motormount 1.2 metre DiSEcQ 1.2 Motormount 1.2 metre


DiSEcQ 1.2 motormount for use with dishes up to 1.2 metre. Highly Recommended.

 currency



price only:  £99.00


Actuator Arms 10 inch to 24 inch Actuator Arms 10 inch to 24 inch 36 volt Actuator Arms for use with dish polar mounts, available in the following lengths,
10" (254mm), 12" (305mm) 18" (457mm) and 24" (610mm). 
[ back ]

Price From:  £30.00
choose length:


Polar Mount for Gibertini 1m Dishes Polar Mount for Gibertini 1m Dishes
needed for motorising the Gibertini 1m dishes. This mount also requires an 36 volt Actuator arm available in this section.  currency



price only:  £29.00


Polar Mount for Gibertini Dishes Polar Mount for Gibertini Dishes
needed for motorising the Gibertini 1.2m and 1.5 m dishes. This mount also requires an 36 volt Actuator arm available in this section.  currency



price only:  £55.00


V-Box II Positioner V-Box II Positioner
This positioner will interface with any Digital receiver with diseqc 1.2 to allow it to move any 36 volt motorised equipment (actuator arm or 36volt H-H mount). Ideal if you want to replace your existing receiver with a new digital unit (SD or HD) but don't want to have to swop your motorized dish setup. Remote control, 99 programmable memories, Fine-tune function for weak signals, Short circuit and overload protection. Auto turn-OFF function, Easy operation and quick installation.
 currency



price only:  £69.00


Gibertini 1.0 Metre Polar Mount Kit Gibertini 1.0 Metre Polar Mount Kit

This is a complete polar mount kit designed to work with the modern satellite receivers using the diseqc protocol(usals),this set-up is for the customer that requires a heavy duty mount with accurate dish positioning ,and a quality dish giving excellent signal gain.

components consist of the following;

1 - 1.0 metre Gibertini aluminium dish ,steel back plate.
1 - invacom universal 0.3 db L.n.b (perfectly matched to this dish)
1 - Gibertini polar mount
1 - 12 inch actuator arm
1 - V box II (diseqc to 36volt positioner)
1 - 550mm x 50mm wall bracket

Dish Specification: Colour light grey
F/D ratio: 0.66 - Offset angle: 21.3 degrees - Frequency range: 10.00 - 13.00 GHz - Illumination Efficiency: 70% - Gain: @ 10.95 GHz: 39.5 dB - Elevation angle range: 20 - 50 degrees - Beam width: 1.37 degrees - Cross pol. discrimination on main axis: > 30 dB - Mast clamp for: 55 - 100 mm - Wind pressure: @ 120 km/h: 145 Kg - First side lobe: 26 dB - Operating temperature: -30º C ~ +70º C - Humidity: Up to 100% condensed - Noise temperature: @ 30 degrees - elevation (K): 34 degrees.

 currency



price only:  £264.00


Gibertini 1.2 Metre Polar Mount Kit Gibertini 1.2 Metre Polar Mount Kit

This is a complete polar mount kit designed to work with the modern satellite receivers using the diseqc protocol(usals),this set-up is for the customer that requires a heavy duty mount with accurate dish positioning ,and a quality dish giving excellent signal gain.

components consist of the following;

1 - 1.2 metre Gibertini aluminium dish ,steel back plate.
1 - invacom universal 0.3 db L.n.b (perfectly matched to this dish)
1 - Gibertini polar mount
1 - 12 inch actuator arm
1 - V box II (diseqc to 36volt positioner)
1 - 550mm x 75mm wall bracket

Dish Specification: Colour light grey
F/D ratio: 0.66 - Offset angle: 21.3 degrees - Frequency range: 10.00 - 13.00 GHz - Illumination Efficiency: 70% - Gain: @ 10.95 GHz: 41.5 dB - Elevation angle range: 20 - 50 degrees - Beam width: 1.37 degrees - Cross pol. discrimination on main axis: > 30 dB - Mast clamp for: 55 - 100 mm - Wind pressure: @ 120 km/h: 145 Kg - First side lobe: 26 dB - Operating temperature: -30º C ~ +70º C - Humidity: Up to 100% condensed - Noise temperature: @ 30 degrees - elevation (K): 34 degrees.

Note: Item available for U.K. shipping only


 currency



price only:  £375.00


Installing a Motorised Satellite Receiver ...
For information about installing a motorised receiver .. [ click here

Satellite Installation Accessories ...
Satellite installation accessories for cable, brackets etc .. [ click here

Brymar Satellite Ltd - 18 Carlton Street, Castleford, West Yorkshire - WF10 1AY - UK - 01977 554466



Back to Top